คณะเทคโนโลยีการเกษตร
The research aims to develop chili Thai commercial varieties for resistance to anthracnose and Pepper yellow leaf curl virus disease. The varieties allowing farmer to reduce the use of chemical pesticides for disease and pest control, also increases productivity and lowers production costs for farmers. The development new varieties are under studied of undergraduate, master's, and doctoral students by using conventional and molecular plant breeding. The new chili varieties were released to farmer and commercial companies for development for Thai commercial seed industry.
คณะวิศวกรรมศาสตร์
This project aims to design and develop an electric tuk-tuk by converting the traditional combustion engine system to an electric system, supporting the reduction of air pollution and promoting sustainable automotive technology. The electric tuk-tuk is designed using a BLDC electric motor and a control system specifically adapted for the unique driving style of three-wheeled vehicles in Thailand. The study considers suitable energy systems and includes interviews with traditional tuk-tuk drivers to ensure the vehicle meets everyday usability needs. The findings suggest that adopting electric tuk-tuks not only reduces emissions and PM2.5 particulate matter but also enhances an eco-friendly image for Thailand’s tourism sector while supporting domestic innovation and economic growth.
คณะวิศวกรรมศาสตร์
This study focuses on the use of ceramic tile powder as a cement replacement material in concrete at an appropriate ratio. The objective is to investigate the properties of replacing cement with tile powder and to determine the optimal mixing ratio of tile powder in cement mortar that can yield properties equivalent to or superior to conventional cement mortar. The experiment involved preparing cement mortar samples by replacing cement with two types of ceramic tile powder waste from tile manufacturing plants: waste tile powder and rectified tile powder. The mixing process was divided into two parts: Part 1 used a cement and tile powder ratio, while Part 2 used the results of the strength analysis from Part 1 to adjust the ratio accordingly. Various properties were tested, including specific gravity, normal consistency, setting time, tensile strength, and compressive strength. The results of the study revealed that replacing of cement with rectified tile powder provided the highest tensile and compressive strength, comparable to that of conventional cement mortar. Therefore, the use of ceramic tile powder as a replacement can enhance compressive strength while reducing cement usage, which has positive environmental implications by decreasing greenhouse gas emissions from cement production. Furthermore, this approach promotes the effective use of waste materials from the ceramic industry, contributing to the sustainability of the construction industry.
คณะวิศวกรรมศาสตร์
During the recent years, PM2.5 concentration is rising above the safety exposure limit in Thailand. PM2.5 could have originated from various sources such as exhaust fumes, open air burning, wildfire, etc. This concludes that all cities or places would have different PM source contributions. Most studies regarding the PM source findings were done based on chemical analysis. Our research team would like to predict the PM sources physically by nanostructures analysis. These methods would require the PM dust to be collected in a limited amount of time and dry. The use of paper filters may cause contamination from filter material which may cause errors in result evaluation. Our team suggests using Electrostatic Precipitator (ESP) where electrostatics is used to capture PM dust. This research mainly focuses on designing and building the ESP system for PM collection whereas the requirement is to collect at least 100 mg of PM dust within 1 day which would be adequate for nanostructure analysis. The study revealed that the customized ESP system could achieve of up to 80% collecting efficiency (which is more than the commercial ESP that we previously used), there’s a also a parametric study of relationships between flow velocity and collecting efficiency where collecting efficiency is inversely proportional to flow velocity. The suggested air velocity is not to exceed 2 m/s. However, there’re still more room for improvement of the ESP system for PM collection such as the convenience of PM collection process which resulted from the ESP construction geometry and sizes.
คณะวิศวกรรมศาสตร์
This research focuses on the design and development of a high-power converter to regulate energy supply from solar cells (Photovoltaic: PV) to a hydrogen production unit (Electrolyzer), which is a crucial component in advancing renewable energy in alignment with the RE100 initiative. Specifically, this study targets Green Hydrogen, which is generated through the water electrolysis process using clean energy from solar cells, ensuring zero emissions and environmental sustainability. The proposed converter includes of a Three-Level NPC Inverter, transformer, Full-Bridge Rectifier, and LC filter to enhance the power quality supplied to the electrolyzer. The system's design and simulation were conducted using MATLAB and Simulink to evaluate circuit performance and analyze operational efficiency. Simulation was conducted using MATLAB and Simulink to evaluate circuit performance and analyze operational efficiency. Additionally, a microcontroller-based control system is integrated with a gate driver circuit to optimize the electrolysis process by reducing power losses. This proposed converter effectively converts PV energy into suitable voltage and current levels for the electrolyzer while maintaining high hydrogen production efficiency.
คณะเทคโนโลยีการเกษตร
This study aimed to investigate the efficacy of lime containing more than 50% calcium oxide and not less than 29% magnesium oxide in enhancing water alkalinity for Pacific White Shrimp (Litopenaeus vannamei) aquaculture. The experiment was conducted at concentrations of 0, 5, 10, 15, and 20 ppm over a 48-hour period, with data collected at 0, 3, 6, 12, 24, 36, and 48 hours. Results demonstrated that lime exhibited high dissolution efficiency (65-86%) within the first hour and reached complete dissolution (98.5-98.6%) within 6 hours. The pH values initially increased proportionally with lime concentration, gradually decreased during 3-12 hours, before stabilizing. Total alkalinity showed significant increase during the first 3-6 hours and remained stable until the end of the experiment. Statistical analysis revealed that both concentration and time significantly affected all parameters (p < 0.001)
คณะสถาปัตยกรรม ศิลปะและการออกแบบ
The concept of building a friendly city for older people by adjusting the physical environment is considered one of the crucial components of promoting older people’s better health and quality of life. Based on this tenet, designing a suitable footpath and considering older people’s needs are vital to the reduction of risks and the increase of safety in travelling, especially for older people living in Wat-Thad and Wat-Klang communities where the proportion of the elderly has continuously, increased. The research aimed to 1) survey the physical environment of footpath, approaching public assistance, 2) observe the elderly’s behavior and satisfaction on footpath in communities, and 3) create the proposal concept in developing the suitable footpath with the elderly’s need in city area. This research used various tools, including the questionnaire on the footpath’s physical environment to analyse problems, limitations, and footpath potentials, the interview of staff in the Engineering Division, Khon Kaen municipality and the questionnaires collecting travelling behaviour, satisfaction and attitude of elderly on the footpath in community. The data analysis the physical environment following six components in the monitoring list showed three used descriptive statistics. Interestingly, from 370 samples, the results of investigating qualified evaluations, namely 1) land utilisation in the communities, 2) linking the transportation network, and 3) beautifully attractive places for walking. However, three unqualified evaluations were 1) safety footpath availability, 2) design for all people, and 3) walking on the footpath to access public assistance and facilities. Moreover, the results from the questionnaire to study older people’s travelling behaviour, indicated that the most travelling objectives were grocery shopping and accessing the recreation sites with frequent visits three to five times per week. Furthermore, older people’s satisfaction with the community footpath was overall at a high level, This research proposed suggestions for developing a safe footpath to ensure safe walking access to facilities and public assistance.
คณะบริหารธุรกิจ
In a world increasingly focused on sustainability and reducing environmental impact, DreamHigh is pioneering an innovative approach to packaging solutions using mycelium—a natural, biodegradable, and renewable material derived from fungi. Our mission is to revolutionize the packaging industry by offering eco-friendly alternatives that not only reduce waste but also align with global efforts to combat climate change. Mycelium packaging offers a compelling alternative to traditional plastic and Styrofoam packaging, which contribute significantly to environmental pollution. It is fully biodegradable, compostable, and capable of breaking down in natural environments within weeks, leaving no toxic residues behind. Additionally, mycelium-based products are lightweight, durable, and customizable, making them suitable for a wide range of applications, from consumer goods packaging to protective shipping materials. DreamHigh’s business plan outlines a scalable production process leveraging advanced mycelium cultivation techniques and partnerships with local agricultural sectors to utilize agricultural waste as a key raw material. This not only ensures cost-efficiency but also supports a circular economy by repurposing waste that would otherwise be discarded.
คณะเทคโนโลยีการเกษตร
การทดลองนี้จึงมีวัตถุประสงค์เพื่อศึกษาผลของน้ำที่ผ่านการฉายพลาสมาในเวลาที่แตกต่างกันต่อคุณภาพการงอกของเมล็ดพันธุ์ข้าวไรซ์เบอรี่ เพื่อเป็นการยกระดับคุณภาพความงอกของเมล็ดพันธุ์ข้าวไรซ์เบอรี่