วิทยาลัยนวัตกรรมการผลิตขั้นสูง
Induction Heating Machine (IHM) is a crucial device in the jewelry industry, utilizing electromagnetic fields to generate heat and join precious metals. This research focuses on developing a Dual Coil Induction Heating Machine (Dual Coil IHM) to enhance production efficiency and reduce costs in jewelry factories using Electromagnetic Analysis (EMA) through Ansys Maxwell software. The research process began with testing a single-coil IHM under real operating conditions and using EMA to analyze the generated magnetic flux density (B). Subsequently, dual-coil configurations in Parallel and Series arrangements were designed and compared. The experimental results revealed that the series dual coil produced a higher magnetic flux and allowed for optimizing current (I), frequency (f), number of coil turns (N), and coil spacing (d) for better manufacturing performance. The findings indicate that the series dual-coil IHM can double production capacity compared to the conventional single-coil model. Furthermore, EMA technology minimizes physical testing, reduces errors, and enhances precision in designing industrial machinery for the jewelry manufacturing sector.
คณะเทคโนโลยีการเกษตร
The reason of this project is How to make water system during breeding Golden apple snail&Green caviar with limitation area. Make sure that waterfowl system can work
คณะวิทยาศาสตร์
This project aims to investigate and develop an energy storage system utilizing solar energy sources through the integration of solar cell technology and Graphene Quantum Dot Battery, representing a novel approach to enhancing energy storage efficiency and prolonging the lifespan of renewable energy systems. The selection of graphene and quantum dots as materials for battery development is attributed to their exceptional properties, including high electrical conductivity, charge storage capacity, efficient energy transfer, and enhanced stability.
คณะสถาปัตยกรรม ศิลปะและการออกแบบ
Interior Architecture Design Project: A Halal Restaurant Integrating the Culture of Songkhla, Thailand
คณะเทคโนโลยีการเกษตร
-
คณะวิทยาศาสตร์
This study aimed to investigate the effectiveness of extracts from moringa seeds, roselle seeds, and tamarind seeds as coagulants to improve water quality in surface water sources. Extracts from these seeds serve as environmentally friendly coagulants and provide alternative options for enhancing surface water quality. The turbidity of surface water sources ranged between 14 and 24 NTU. The coagulation process used the Jar Test method, where the moringa seed, roselle seed, and tamarind seed extracts functioned as both primary coagulants and coagulant aids. In the preparation process, the seeds were finely ground and extracted using a 0.5-M sodium chloride (NaCl) solution. These extracts were then applied as coagulants to reduce turbidity and enhance water quality, with each concentration tested in 300 ml of water. The results indicated that the most effective way to remove turbidity using 2,000 mg/L of moringa seed extract, achieving a turbidity reduction of approximately 73.19% at a cost of 0.0309 baht per 300 ml of water. Followed by Tamarind seed extract, with a concentration of 4,000 mg/L, followed with a turbidity reduction of approximately 56.75% at a cost of 0.0933 baht per 300 ml. Lastly, roselle seed extract at 6,000 mg/L achieved a turbidity reduction of approximately 32.67% at a cost of 0.0567 baht per 300 ml of water.
คณะวิทยาศาสตร์
The aim of experiment was to study the pyrolysis oil derived from sorted landfill plastic waste that had been buried for 15 years by the Nonthaburi Provincial Administrative Organization. The pyrolysis oil was produced using a Fixed-Bed Reactor at 450 °C for 1.5 hours with LPG as the feedstock, with the goal of using the pyrolysis oil as an alternative fuel. The experiment was conducted under four different conditions : (1) plastic waste buried in a landfill that has not been washed but has been reduced in size, (2) plastic waste buried in a landfill that has been washed and has been reduced in size, (3) plastic waste buried in a landfill that not has been washed and has not been reduced in size, (4) plastic waste buried in a landfill that has not been washed and has been reduced size, with activated carbon used as a catalyst. The experiment revealed that three products were produced : Oil, gas, and char in different quantity. The pyrolysis oil were compared in terms of quality based on pH, Heating value, Moisture content, Functional group, and Chemical Composition. The pyrolysis oil we obtained will be referenced according to the criteria from the Department of Energy Business. The analysis results of the pyrolysis can explain which conditions are suitable for replacing fuel oil in industrial It is therefore one of the approaches that helps manage plastic waste in landfills, reducing the quantity by converting it into usable energy.
คณะอุตสาหกรรมอาหาร
The researcher aims to develop bagasse mixed with molasses as a smoking material for meat, enhancing its unique aroma and flavor. This innovation caters to the food industry and consumer demand while adding value to sugar mill byproducts, reducing waste, and promoting efficient resource utilization.
คณะวิทยาศาสตร์
The current residential solar panels lack an adequate monitoring system, which hinders their optimal utilization. This research aims to design an Internet of Things (IoT) monitoring system and employ machine learning techniques to predict the current and voltage generated by solar panels. Experimental studies have revealed a correlation between dust accumulation and the current output of solar panels. The proposed system facilitates the prediction of the optimal time for cleaning solar panels.